Shopping Cart:

0 Items(s)

$0.00 Subotal

View Cart


Free Shipping

Browse Products


Aquarium Blog

Read our blog for news and product announcements!
Aquarium Blog

Connect With Us

We Offer

FedEx and Paypal

Water General 100GPD RO/DI

Water General 100GPD RO/DI
Water General 100GPD RO/DI
Price: $169.99
Save to my Wish List
Overall rejection/removal rate: 99 to 100%
1st stage: 5 micron sediment filter, removes sediment, rust, dirt. (replace every 6-12 month)
2nd & 3rd stage: premium grade coconut shell carbon block filter, removes chlorine, chloramines, bad taste and odor (replace every 6-12 month)
4th stage high rejection TFC/TFM-100GPD membrane, removes 95% to 97% of chemical, minerals, dissolved solids, like arsenic, lead, silica, nitrate, copper, ammonia, sodium, fluoride, etc. (replace every 12-24 month)
5th & 6th stage: de-ionized filter, further removes the mineral and chemical contents of water and achieving 99% to 100% removal rate (replace as needed, or after 600 to 1000 gallons). It comes with refillable clear casing. The DI resin inside changes color from green to dark brown when the resin is exhausted.

Operating parameter:
*Feed water pressure: 40-80 psi, (for pressure below 40 psi, use booster pump or permeate pump)
*Feed water temperature: 40-100 F
*pH range: 3-10 *Hardness: lower than 500ppm (hard water will shorten the life of filters, but system will still perform) Using a water softening system prior to RO+DI filter will prolong the life of filters.
*Dissolved iron: less than 1 ppm
*Total Dissolved Solids (TDS): less than 1000 ppm, higher TDS will shorten the life of filters.

* Dimension:
15in width x 16in height x 5.5in depth
* The system come with under-the-sink adapter, drain clamp, tubing, shut off valve. Optional easy-connect adapters are available for countertop installation or garden hose/ laundry room installation.

FREE bonus Pressure Gauge:  It's helpful in monitoring:

  1. House water pressure
  2. Operating pressure of the RO system
  3. When to replace sediment & carbon filters
  4. When troubleshooting the system
2DI Filters:  Clear, refillable housing

The DI resin we used is the highest grade, nuclear grade mixed-bed resin. It is used in pharmaceuticals, semiconductors, laboratory applications.  It is able to achieve the highest purity of 0 ppm (Zero mineral, Zero Silica) and near 18 meg.ohm resistivity. Now it is available to Aquarium lover and reefer at affordable prices. 

DI Filter Dispensing Ball Valve is included:  We specially include additional ball valve for the DI filter.  The output is going to your own container or fish tank.  When you shut-off this valve at the output, the automatic shut off valve with turn off the system in about 1 to 2 minutes.  You don't need to shut off at the water supply.  Just shut off the output valve, system would shut off
Automatic-Shut-Off Valve is included; when you shut off the dispensing valve or when your own float valve closes, the automatic shut-off valve shuts off the water feed and drain, preventing wastage of water going to drain.  And if you have your own large container and float control valve, this system would turn ON/OFF automatically to refill your container.
Feed Water Adapter: for under the sink installation, we give you the adapter with valve to put in between the cold water line. Our adapter has several advantages over the self-piercing valve.  Our adapter will not clog up like the needle point piercing valve.  also our adapter does not require putting a hole in the pipe.  also you can easily replace the valve or relocate the valve without changing your piping, unlike the other self-piercing valve, where once it punctures a hole you cannot replace the valve, then you need to replace the pipe and the valve.
Membrane Flush  the system automatically flushes the membrane when it is making water. (Optional) You can also manually flush the membrane when you turn the black handle on the flow restrictor to "flow" parallel to the line for 3 minutes to flush the mineral built-up in the membrane.  You can do this every few months depending on the water condition, thus prolong the life of membrane.

(Optional)Inline type flow restrictor:  Patented flow restrictor with built-in membrane flush valve.

Clear bottom 3 filter housings:

For easy checking of filter condition

They look NICE