ReefKeeper Lite Net

The new ReefKeeper Lite is a big change to business as usual! It's small, expandable and perfect for nano tanks, beginners, and people looking for a mid level controller!

The ReefKeeper Lite or RKL as it's known here, has a 5 (mechanical) button interface and a larger 16 x 2 LCD display for easy readability. While some of the advanced modules and features of the RKE are not available for the RKL, it will have more than enough power to monitor and control single tank systems, as well as small to mid sized tanks alike!

The RKL is the only controller under $120 that offers four outlets and temperature control while still providing the customer an upgrade path as their system needs grow!

With up to four modules, the ReefKeeper Lite controller is perfect for streamlining your tank without breaking the bank!

Any system combination you purchase can be added to, up to the four module limit. The RKL can interface with ANY of the Digital Aquatics modules!

The ReefKeeper Lite can interface with up to 4 modules in almost any configuration you'd like. That's over 15 million possible combinations!

The ReefKeeper Lite has a 5 button interface; a big improvement over traditional 3 button interfaces that are currently used for entry level controllers!

You can set up to 16 unique timers with day of week capability as well other advanced features.

With a built in speaker the ReefKeeper Lite offers audible as well as visual feedback.

Get Alerted! Set alarms to alert you of almost any event in your system that you need to know about. With the optional NET module you can get email or TXT alerts to your cell phone.

Improved functions help you control all aspects of your tank quickly and easily.

Updating the ReefKeeper Lite via USB when new software features are released is the easy way to make sure you always have the latest features and fixes. Better yet it's included at no extra cost!

Night mode can be configured so that moonlights and pumps can be adjusted in the evening times to simulate the natural environment.

There are 2 wavemaker cycles in the ReefKeeper Lite, cycles A and B. When a channel is designated as a pump you can select a wavemaker cycle A or B. The two cycles alternate opposite each other to simulate wave motion. Under the wavemaker setup you can set how long you want each cycle time to be. During night mode the cycle can be turned off to give a calming affect.

Just as in all Digital Aquatics controllers, the ReefKeeper Lite has a Standby mode that can be programmed from 1 to 59 minutes. When in Standby ReefKeeper Lite turns off the powerhead and skimmer pumps that are programmed to be off during that time. Standby/Feed mode helps reduce the bio load on the tank by maximizing the food eaten by fish and corral while minimizing waste. Standby mode is also useful when it is time to perform maintenance on your tank and you need all pumps to be temporarily turned off.

The display unit has several mounting options to accommodate different configurations. It can be mounted flush to your hood/cabinet for a sleek look by cutting out a rectangle. It can also be mounted easily to any flat surface with or without the mounting tabs.

The front of the ReefKeeper Lite display has a custom faceplate so that wet fingers won't cause any problems.

The internal battery will last for years keeping the time and settings of the ReefKeeper Lite. A power outage will not require the adjustments that traditional light timers need after the power is restored.

The menu system is an easy-to-use interface that allows you to setup the ReefKeeper Lite to meet your specific needs. The ReefKeeper Lite controller uses ReadyFit functions as well as the EasyFlow menu system.

Tech Specs Max Expansion: 4 Modules Display: 16 x 2 alpha-numeric Backlight Colors: 1 Ethernet: Yes (Requires optional NET module) Interface: 5 Button Timers: 16 Alarms: 16 Audible Feedback: Yes Battery Backup: Yes Data Graphing: Yes (Requires myReef 2.0 or optional NET module) Key Lock: Yes Wavemaker: 2 (A/B) Sure-on Feature: Yes EasyFlow Menu System: Yes ReadyFit Functions: Yes Connections One 6' Bus Cable (attached)

Physical Details Headunit Dimensions: 3.9" x 2.8" x 0.6" Package Contents ReefKeeper Lite Basic ($119.99)   1 x RKL Head Unit   1 x PC4 - Power Controller 4   1 x DA iTemp Temperature Probe   1 x SID - System Interface Device   1 x Programming Coupler   4 x Mounting Screws ReefKeeper Lite Plus ($279.99)   1 x RKL Head Unit   2 x PC4 - Power Controller 4   1 x SL1 - System Lab 1   1 x DA iTemp Temperature Probe   1 x DA pH Probe   1 x 7 pH Cal Solution   1 x 10 pH Cal Solution   1 x SID - System Interface Device   1 x 6' Bus Cable   1 x 3' Bus Cable   1 x Programming Coupler   8 x Mounting Screws ReefKeeper Lite NET ($379.99)   1 x RKL Head Unit   2 x PC4 - Power Controller 4   1 x SL1 - System Lab 1   1 x NET - NET Interface Module   1 x DA iTemp Temperature Probe   1 x DA pH Probe   1 x 7 pH Cal Solution   1 x 10 pH Cal Solution   1 x SID - System Interface Device   1 x 6' Bus Cable   1 x 3' Bus Cable   1 x 1' Bus Cable   1 x Programming Coupler   1 x 7' CAT5 Ethernet Cable   10x Mounting Screws