Copper Power | 16oz

LONG-LASTING COPPER STABILITY for SALTWATER AQUARIUMS where ICH, FUNGUS & EXTERNAL PARASITES are a concern.

- Wide copper range—up to 2.5 ppm

- Effective & safe for saltwater aquariums

- Long - lasting copper stability and

predictability on copper levels

- NO Frequent Adjustment / NO Frequent

- Fluctuations

- Non-Staining

- Odorless

- Remains active in water for month

- Filtration Friendly - Not removed by

carbon filtration. Safe with ozone

systems, UV sterilizers, & protein

skimmers.

S E T - U P & D I R E C T I O N S: For best results, perform this procedure in a dedicated hospital tank with closed-loop system. Acclimate fish by gradually increasing Copper Power™ dosage over several days to reach the desired copper level (up to 2.5 ppm). Refer to the dosage guideline below. Copper levels are typically maintained at the desired range for approximately 14 to 30 days. Test copper level periodically to check, maintain, or adjust as needed. Monitor fish closely during this period — if any signs of stress appear, remove fish immediately.

Copper Power™ is formulated to maintain those copper levels for extended periods, unless copper is consumed during the procedure or water is added or replaced within the system. After the procedure is complete, transfer fish to a new, sterile tank for observation before reintroduction.

Please Note: The suggested dosages below are conservative starting points. The final dosage may vary and may require adjustments based on system conditions and a trusted Copper Checker to reach the desired copper levels.

Barrier Reef recommends a Hanna Copper Checker for accurate testing.